Issues to be aware of when transporting parts

  The precision parts themselves are a very precise thing. The production equipment is exquisite, and the production environment is also exquisite. The slight collision may lead to the problem of inconsistency with the requirements, so the transportation of such high requirements is actually a big problem.
  Many years ago, the customer would like to rush order from flytigerCNC, the workers worked overtime and rushed out, transported to the customer's side at the fastest speed, but the result was that none of the batch of parts was in compliance with the standard. Today we will talk about the matters needing attention during the transportation process.
  After the parts are produced, they must be allowed to cool for a while at room temperature. Then strictly test each component. After the test is passed, it must be placed in a box with a protective film. Then, when the whole box of parts is loaded onto the car, it must be handled with care. Too large fluctuations can easily cause deformation of the parts. Transport to the destination is also a light hand. Try to choose the best way to go during the transportation process. Don't be too bumpy. In short, any small detail will lead to deformation of the parts.
  Some parts can be placed on our plastic boxes and placed one by one. very safe！