material requirements for Precision parts processing

  The smaller the part, the higher the machining accuracy requirements, and the high-precision part machining is called precision part machining. Because of its high precision requirements, the performance and accuracy requirements of the processing machine are also very high, and Materials can not use materials with too high strength, such materials will increase the difficulty of processing, if it exceeds the hardness of the processing machine, it may even damage the machine. So what are the material requirements for precision part processing?

  There are many kinds of materials in common processing, but we can classify them as metal and non-metal. The highest hardness of metal is stainless steel, followed by iron, copper again, and finally aluminum. Among the non-metallic materials, ceramics and plastics are the representatives.

  Some products require higher hardness as possible, but because the hardness of the machine tool has a certain limit, the material to be processed cannot be too hard, at least not higher than the hardness of the machine tool. If it is higher than the hardness of the machine tool, then It must be impossible to process.

  The hardness of the material should be moderate, at least one level lower than the hardness of the machine, and the analysis of the role of the processing device, and then the reasonable selection of the machine. In this way, it is guaranteed that the products produced are the most suitable and the most economical.

  The selection of materials for precision parts processing must also have certain requirements. Not all materials are suitable for processing. Materials that are too soft or too hard are not feasible. In general, the material must be carefully determined before processing, pay attention to the hardness of the material, the material of ultra-high hardness will not only damage the parts, but also cause the occurrence of accidents such as the falling of the turning tool.

FlytigerCNC is a high-tech enterprise specializing in the processing of precision metal parts. The company has more than 15 years of experience in precision parts processing and has a research and development team of more than 20 people, dedicated to providing you with the most cost-effective products and services.