How to coordinate the tool in the CNC center ?

How to coordinate the tool in the CNC center, simply say the first step to the X direction and the last to the Z direction.

1. Correct the X axis first, take the tool on the right side of the tool and gently touch it. Then gently lift the tool along the Z axis and clear the relative coordinates of the CNC machining center.

2. Move the tool to the left side of the material, gently touch the tool with the material, lift the tool, this is the X value of the relative coordinates of the machine, move the tool to half of the relative coordinate X, and record the absolute coordinates of the machine. X value, and press (INPUT) input coordinate system (some systems can also be measured) Fauna system can be "measured" or Y axis;

3. Use the tool to touch the front side of the material, the tool and material gently touch, lift the tool along the Z direction, and clear the relative coordinates of the machine tool;

4. Put the tool behind the material, gently touch the tool and material, lift the tool, this is the Y value of the relative coordinates of the machine, move the tool to half of the relative coordinate Y, and record the absolute coordinates of the machine. Y value, and press the (INPUT) input coordinate system, you can press the "measurement" or the Z-direction tool. The Z-pair tool of the CNC milling machine moves the tool to the workpiece to the Z-zero point. Upper, the tool is in light contact with the surface, and the Z-direction value in the coordinate system of the machine tool at this time is recorded, and input into the corresponding coordinate system.